EC9850T - Trace SO2 analyzer
|
The EC9850T SO2 trace analyzer is Ecotech's specially configured sulfur dioxide analyzer designed to measure low levels of SO2 with high accuracy. |
![]() |
The EC9850T SO2 trace analyzer incorporates UV fluorescence spectrometry with microprocessor control for accurate and reliable measurement of sub-ambient levels of SO2.
The EC9850T can measure levels of SO2 to a sensitivity of 200ppt in the range of 0-2000 ppb. The SO2 concentration is automatically corrected for gas temperature and pressure changes and can be displayed in units of ppb, ppm, μg/m3 or mg/m3.
Excitation (UV radiation) is measured by a reference detector and emission (fluorescence radiation) from the sample is measured by a photomultiplier tube (PMT) in a reduced atmosphere reaction cell.
Product page at http://www.ecotech.com/gas-analyzers/so2-trace-analyzer
Features
- EC9850T is U.S. EPA approved (Automated Equivalent Method EQSA-0193-092)
- Auto-zero routine allows the analyzer to periodically check and correct for cell contamination
- Kalman digital filter continuously provides the best compromise between response time and noise reduction
- Internal data logging uses Flash ROM to store up to 175 days of 5 minute averaged data
Specifications - EC9850T SO2 trace analyzer
|
Range: LDL: Noise: Temperature range: Sample flow rate: Weight: Dimensions: Power: |
Auto ranging 0-2000 ppb 200 ppt with Kalman or 300sec filter active 100 ppt RMS with Kalman or 300 sec filter active 20-30oC may be operated from 15-35oC 500-750cc/min, 0.5-1.00 LPM optional 20.9 kg 43.2 x 17.8 x 64.8 cm (w x h x d) 99-132 VAC, 198-264 VAC 47-63 Hz |
- Supports internal data logging capability with storage up to 175 days of 5 minute data stored in flash ROM

